E type Circlip Manufacturer


Etype Circlip	Circlip Grove for Shaft

Unexapnded	Expanded
All Dimensions in Millimeters

Shaft		Circlip Dimensions							Groove Dimensions					Code No.
Standard material: Carbon Spring Steel Standard Finish: Phosphate and Oil. (Also available in Stainless Steel)									Measurements in mm & kN
									* This size in Beryllium Copper only
									Key to table headings and abbreviations
S	Tol	t	Tol	D	C	g	Tol	Fr kN	G	Tol	W	n	Fr kN	Code No.
1.20	±0.20	0.2	±0.02	1.95	2.25	0.58	±0.04	0.08	0.8	+0.00 -0.04	0.24	0.4	0.03	*RSM0008
1.70	±0.30	0.3		2.90	3.25	1.01		0.12	1.2	+0.00 -0.06	0.34	0.6	0.04	RSM0012
2.25	±0.25	0.4		3.85	4.25	1.28		0.22	1.5		0.44	0.8	0.07	RSM0015
2.75	±0.25	0.5		4.40	4.8	1.61		0.35	1.9		0.54	1.0	0.10	RSM0019
3.50	±0.50	0.6		5.90	6.3	1.94		0.50	2.3		0.64	1.0	0.15	RSM0023
4.50	±0.50	0.6		6.80	7.3	2.70		0.65	3.2	+0.000 -0.075	0.64	1.0	0.22	RSM0032
6.00	±1.00	0.7		8.80	9.3	3.34	±0.048	0.95	4.0		0.74	1.2	0.25	RSM0040
7.00		0.7		10.75	11.3	4.11		1.15	5.0		0.74	1.2	0.90	RSM0050
8.00		0.7		11.75	12.3	5.26		1.35	6.0		0.74	1.2	1.10	RSM0060
9.50	±1.50	0.9		13.80	14.3	5.84		1.8	7.0	+0.00 -0.09	0.94	1.5	1.25	RSM0070
10.50	±1.50	1.0	±0.03	15.60	16.3	6.52	±0.058	2.5	8.0		1.05	1.8	1.42	RSM0080
12.00	±2.00	1.1		18.20	18.8	7.63		3.0	9.0		1.15	2.0	1.60	RSM0090
13.00	±2.00	1.2		19.65	20.4	8.32		3.5	10.0		1.25	2.0	1.70	RSM0100
15.50	±2.50	1.3		22.65	23.4	10.45	±0.07	4.7	12.0	+0.00 -0.11	1.35	2.5	3.10	RSM0120
20.00	±4.00	1.5		28.60	29.4	12.61		7.8	15.0	+0.00 -0.11	1.55	3.0	7.00	RSM0150
25.50	±5.50	1.75		36.70	37.6	15.92		11.0	19.0	+0.00 -0.13	1.80	3.5	10.00	RSM0190
31.50	±6.50	2.0		43.65	44.6	21.88	±0.084	15.0	24.0	+0.00 -0.13	2.05	4.0	13.00	RSM0240